
KOMATSU WA250-6 wheel loader
| Model | Komatsu SAA6D107E-1 | |
| Type | Water-cooled, 4-cycle | |
| Aspiration | Turbocharged, aftercooled | |
| Number of cylinders | 6 | |
| Bore x stroke | 4.21" x 4.88" | 107 mm x 124 mm |
| Piston displacement | 408 in³ | 6.69 ltr |
| Governor | All-speed, electronic | |
| Horsepower: | ||
| SAE J1995 / Gross | 140 HP | 104 kW |
| ISO 9249/SAE J1349 / Net | 138 HP | 103 kW |
| Hydraulic fan at maximum speed / Net | 134 HP | 100 kW |
| Rated rpm | 2000 rpm | |
| Fan drive method for radiator cooling | Hydraulic | |
| Fuel system | Direct injection | |
| Lubrication system: | ||
| Method | Gear pump, force-lubrication | |
| Filter | Full-flow type | |
| Air cleaner | Dry type with double elements and dust evacuator, plus dust indicator | |
| EPA Tier 3 and EU Stage 3A emissions certified. |
| Travel speed (Measured with 17.5-25 tires): | Both Forward and Reverse | |
| 1st | 2.2 - 7.3 mph 3.6 - 11.7 km/h | |
| 2nd | 7.3 mph 11.7 km/h | |
| 3rd | 10.1 mph 16.2 km/h | |
| 4th | 21.2 mph 34.2 km/h | |
| Travel speed (Measured with 20.5-25 tires): | Both Forward and Reverse | |
| 1st | 2.5 - 8.1 mph 4.0 - 13.0 km/h | |
| 2nd | 8.1 mph 13.0 km/h | |
| 3rd | 11.2 mph 18.0 km/h | |
| 4th | 23.6 mph 38.0 km/h |
| Drive system | Four-wheel drive | |
| Front | Fixed, semi-floating | |
| Rear | Center-pin support, semi-floating, 24° total oscillation | |
| Reduction gear | Spiral bevel gear | |
| Differential gear | Torque proportioning | |
| Final reduction gear | Planetary gear, single reduction |
| Service brakes | Hydraulically-actuated, wet disc brakes actuate on four wheels. | |
| Parking brake | Wet, multi-disc brake on transfer output shaft. | |
| Emergency brake | Parking brake is commonly used |
| Type | Full-hydraulic power steering | |
| Steering angle | 38° each direction (40° end stop) | |
| Minimum turning radius at the center of outside tire | 17'0" | 5175 mm |
| Steering system: | ||
| Hydraulic pump | Gear type pump | |
| Capacity (at rated rpm) | 29.1 U.S. gal/min | 110 ltr/min |
| Relief valve setting | 2,700 psi | 18.6 MPa 190 kgf/cm² |
| Hydraulic cylinders: | ||
| Type | Double-acting, piston type | |
| Number of cylinders | 2 | |
| Bore x stroke | 2.8" x 17.8" | 70 mm x 453 mm |
| Loader control: | ||
| Hydraulic pump | Gear type pump | |
| Capacity | 20.6 U.S. gal/min | 78 ltr/min |
| Relief valve setting | 3,000 psi | 20.6 MPa 210 kgf/cm² |
| Hydraulic cylinders: | ||
| Type | Double-acting, piston type | |
| Number of cylinders | bore x stroke | bore x stroke |
| Boom cylinder - 2 | 5.1" x 28.2" | 130 mm x 717 mm |
| Bucket cylinder - 1 | 5.9" x 19.3" | 150 mm x 491 mm |
| Control valve | 2-spool type | |
| Control positions: | ||
| Boom | Raise, hold, lower, and float | |
| Bucket | Tilt-back, hold, and dump | |
| Hydraulic cycle time (rated load in bucket) | ||
| Raise | 6.3 sec | |
| Dump | 1.7 sec | |
| Lower (Empty) | 3.6 sec |
| Cooling system | 5.8 U.S. gal | 22 ltr |
| Fuel tank | 49.1 U.S. gal | 186 ltr |
| Engine | 6.1 U.S. gal | 23 ltr |
| Hydraulic system | 17.7 U.S. gal | 67 ltr |
| Axle (each, front and rear) | 4.8 U.S. gal | 18 ltr |
| Transfer | 1.3 U.S. gal | 5 ltr |
| ID | Product | Area | Time |
| 3058 | WA50-6 Wheel Loader | Libya | 2022-02-05 03:34 |
| 3057 | WA50-6 Wheel Loader | Libya | 2022-02-05 03:34 |
| 1329 | WD600-6 Wheel Loader | Singapore | 2016-05-24 16:09 |
| 1328 | WD600-6 Wheel Loader | Singapore | 2016-05-24 16:09 |
| 1309 | WD600-6 Wheel Loader | Singapore | 2016-05-13 09:49 |
Copyright Notice © 2002-2025 cmsou.com Construction Machinery Online. All rights reserved.
Address: Room 1903, Building 8, Tianchangyuan, Media Village, Beiyuan Road, Chaoyang District, Beijing 100107 P.R.China
E-Mail: webmaster@cmsou.com TEL: 0086-10-52895329 FAX:0086-10-84673349 Site Map | Brand | Products