News Product Company
Home News Center Product Center Company Directory Inquiry List
Product Center > KOMATSU > KOMATSU Bulldozer > KOMATSU D39PX-23 bulldozer

KOMATSU D39PX-23 bulldozer

Permalink : http://product.cmsou.com/detail_NDgy7---.html    Last Updated : 2014-06-17
KOMATSU D39PX-23 bulldozer

KOMATSU D39PX-23 bulldozer

  • Feature
  • Parameter
New Power and Economy modes: Full power when you need it and Economy mode to save fuel when you don't. New engine and hydrostatic pump control technology improves operational efficiency and lowers fuel consumption. SAA4D95LE-6 variable flow turbocharged and aftercooled 3.26 liter diesel engine provides excellent fuel economy. This engine is EPA Tier 4 Interim and EU Stage 3B emissions certified. Variable Flow Turbocharger uses a simple valve to provide optimum air flow under all speed and load conditions. Komatsu Diesel Oxidation Catalyst reduces particulate matter using passive regeneration 100% of the time. No active or manual regeneration is required. Rear view monitoring system (standard) Advanced diagnostic system continuously monitors machine operation and vital systems to identify machine issues and assist with troubleshooting. Single pedal can act as either brake or Decelerator Improved Cooling System ■ Electronically controlled hydraulically driven fan is manually reversible ■ Gas assisted lift cylinders on radiator cover opens for easy cleaning ■ Side-by-side coolers with increased cooling capacity Integrated ROPS cab features: ■ Large, quiet, and pressurized cab ■ Excellent visibility with integrated ROPS structure ■ New heated air-ride seat with 15% higher capacity (standard) ■ Standard aux jack and (2) 12V power convertors Improved durability ■ Heavy-plate steel used for nose and tanks ■ Dozer frame with full steel castings ■ Komatsu designed and manufactured components Self-adjusting idler support provides constant and even idler tension, reducing vibration and increasing undercarriage life. Power Angle Tilt (PAT) dozer with manually adjustable blade pitch increases productivity in a variety of applications. ■ Three mounting locations for grade control masts Complete operator blade control ■ Palm Command Control System (PCCS) ■ Electronic Proportional Control (EPC) ■ Adjustable Quick shift and Variable shift modes ■ New blade angle switch ■ Normal and Fine blade controls ■ Multiple Operator memory storage New more efficient HST with electronic control ■ Customizable Quick shift (3 speed) settings for the operator ■ Variable speed selection (20 speeds) ■ Low speed matching technology (larger displacement pumps/efficient engine speed) ■ Up to 20%* reduced fuel consumption in E mode and 10%* in P mode. Large color monitor ■ Easy-to-read and use large 7" high-resolution multi-color monitor ■ ECO guidance ■ On-board diagnostics KOMTRAX® equipped machines can send location, SMR and operation maps to a secure website utilizing wireless technology. Machines also relay error codes, cautions, maintenance items, fuel levels, and much more. * Compared to D39-22 model
Engine
ModelKomatsu SAA4D95LE-6*
Type4-cycle, water-cooled, direct injection
AspirationVariable flow turbocharged, air-to-air aftercooled
Number of cylinders4
Bore x stroke3.75" x 4.52"95 mm x 115 mm
Piston displacement199 in³3.26 ltr
GovernorAll-speed, electronic
Horsepower:
SAE J1995 - Gross107 HP79 kW
ISO 9249 / SAE J1349 - Net105 HP78 kW
Rated rpm2200 rpm
Fan drive typeHydraulic (reversible)
Lubrication system:
MethodGear pump, force lubrication
FilterFull-flow
*EPA Tier 4 Interim and EU stage 3B emissions certified
Hydrostatic Transmission
Travel speed
(quick shift mode)*
ForwardReverse
1st0–2.1 mph
0–3.4 km/h
0–2.5 mph
0–4.1 km/h
2nd0–3.5 mph
0–5.6 km/h
0–4.0 mph
0–6.5 km/h
3rd0–5.3 mph
0–8.5 km/h
0–5.3 mph
0–8.5 km/h
Travel speed
(variable mode)
ForwardReverse
0–5.3 mph
0–8.5 km/h
0–5.3 mph
0–8.5 km/h
*Quick shift speeds are adjustable in the monitor.
Final Drive
Minimum turning radius:87"2.2 m
As measured by track marks on the ground at pivot turn.
Steering System
Minimum turning radius:87"2.2 m
As measured by track marks on the ground at pivot turn.
Undercarriage
SuspensionRigid type
Track roller frameMonocoque, large section, durable construction
Rollers and idlersLubricated track rollers
Sealed and lubricated trackTrack tension is easily adjusted with grease gun.
Number of track rollers (each side)6
Type of shoes (standard)Single grouser
Number of shoes (each side)39
Grouser height2.1"53 mm
Shoe width (standard)25"635 mm
Ground contact area4,616 in²29782 cm²
Ground pressure
(with dozer, ROPS cab)
4.70 psi0.33 kgf/cm² / 31.7 kPa
Track gauge5'11"1810
Length of track on ground7'8"2345 mm
Service Refill Capacities
Coolant9.0 U.S. gal34 ltr
Fuel tank50.2 U.S. gal190 ltr
Engine oil2.9 U.S. gal11 ltr
Hydraulic tank15.8 U.S. gal60 ltr
Final drive (each side)0.9 U.S. gal3.5 ltr
Operating Weight (APROXIMATE)
Tractor weight:Including ROPS cab, U frame for power angle tilt dozer, rated capacity of lubricant, coolant, full fuel tank, operator, and standard equipment.
ROPS cab18,982 lb8610 kg
Operating weight:Including Power Angle Tilt dozer, ROPS cab, operator, standard equipment, rated capacity of lubricant, hydraulic control unit, coolant, and full fuel tank.
ROPS cab21,675 lb9830 kg
Hydraulic System
Closed-center Load Sensing System (CLSS) designed for precise and responsive control, and for efficient simultaneous operation.
Hydraulic control unit:
All spool control valves externally mounted remote to the hydraulic tank. Piston-type hydraulic pump with capacity (discharge flow) of 99 ltr/min 26 U.S. gal/min at rated engine rpm.
Relief valve setting3,974 psi27.4 MPa / 280 kg/cm²
Hydraulic cylindersDouble-acting, piston type
Number of cylinders:BoreBore
Blade lift / 23"75 mm
Blade tilt / 13.6"90 mm
Blade angle / 23.1"80 mm
Blade pitch1 adjustable linkage
Hydraulic oil capacity (refill):
Power angle tilt dozer15.9 U.S. gal60 ltr
Control valves:
3-spool control valve for Power Angle Tilt dozer
Positions:
Blade liftRaise, hold, lower, and float
Blade tiltRight, hold, and left
Blade angleRight, hold, and left
Additional control valve required for ripper
Positions:
Ripper liftRaise, hold and lower
  • Send Inquiry
  • Contact
  • Note: 1) Please write in English    2) indicates required fields


Copyright Notice © 2002-2024 cmsou.com Construction Machinery Online. All rights reserved.

Address: Room 1903, Building 8, Tianchangyuan, Media Village, Beiyuan Road, Chaoyang District, Beijing 100107 P.R.China

E-Mail: webmaster@cmsou.com TEL: 0086-10-52895329 FAX:0086-10-84673349 Site Map | Brand | Products