News Product Company
Home News Center Product Center Company Directory Inquiry List
Product Center > Zoomlion > Zoomlion Truck Crane > Zoomlion QY130H-1 Truck Cranep

Zoomlion QY130H-1 Truck Cranep

Permalink :    Last Updated : 2011-09-23
Zoomlion QY130H-1 Truck Cranep

Zoomlion QY130H-1 Truck Cranep

  • Feature
  • Parameter
  • Components&Parts

The crane adopts polygon-section boom(Patent No.: ZL 2004 2 0035755.7)whichmakes the stress distributed more evenly, the load bearing condition improved, the deadweight reduced, and the load carrying capacity of boom improved.

The boom adopts two-section independent telescoping mechanism (Patent No.: ZL 2004 2 0035753.8) which greatly improves the lifting performance of themiddle-long boom.

The crane adopts double slewing mechanism and closed control circuit(Patent No.:ZL 2004 2 0035751.9)which make gear drive continuously and smoothly. In addition, it has the advantages of good cushioning performance, high accuracy of motions, high utilization ratio of energy and low heat of systemwhile the crane starts or brakes.

The crane adopts load sensor and electro-hydraulic proportional control system (Patent No.: ZL 03 2 27135.2) which can improve the jogging performance of motions.

The electric system has the faulty self-diagnosis function, which can monitor the working state of electronic control system in the course of running crane. If the abnormal phenomena happen, it can find out faults by a certain way to calculate, start the corresponding fault running modules and then display the corresponding information on interface. In this way, the service man can find out the faults and do maintenance at once.

The crane adopts CAN-bus control technology which ensures the high reliability of data transfer.

The crane adopts limit load control technology which can ensure the engine power to be full used and prevent it from shutdown due to overload.

The crane is equipped with a load moment limiter with multifunction which can ensure high safety, reliability and accuracy.

The crane adopts an operator's cab which can tilt 20°to broaden operator’s view.

The derricking mechanism adopts four modes, e.g. high speed, middle speed, low speed and jogging, to meet the requirements under different working conditions.

The driver’s cab adopts an advanced reversing rear display system which displays rear working area directly to make reversing much safer andeasier.




Working performance specification

Max. rated total lifting capacity  kg


Max. load moment of basic boom  kN.m


when the working radius is 6m

Max. lifting height of basic boom m


Max. lifting height of main boom m


Deformation of boom is not taken into consideration.

The value in the bracket indicates the crane with extension boom.

Max. lifting height of fly jib m


Working speed

Max. speed of single rope on main winch m/min


The 4th layer of drum

Max. speed of single rope onauxiliary winch  m/min


The 4th layer of drum

Derricking time of boom  s


Telescopic time of boom  s


Slewing speed  r/min


Traveling specification

Max. traveling speed  km/h


Max. gradeability  %


Min. turning circle diameter  m


Min. ground clearance  mm


Limits for exhaust pollutants and smoke

Comply with related standards




Oil consumption per hundred kilometers L


Mass specification

Deadweight of crane in traveling condition kg


The value in the bracket indicates advertised specification.

Complete vehicle kerb mass kg


The value in the bracket indicates advertised specification.

Front axle load  kg


Including boom

Intermediate and rear axles loadkg


Including boom

Dimension specification

Overall dimensions(L×W×H)mm



Advertised specification (excluding boom)


Including boom

Base on outriggers m


Distance between outriggers m

8.5 (full extended)

5.6 (half extended)

Main boom length m


Main boom angle°


Fly jib length m


Extension boom + fly jibm

7.5, 24

Extension boom is available as options.

Offset angle of fly jib °

0, 15, 30




Feature No.:ZLJ5700H3






Rated power      KW/r/min


Max. output torque   N.m/r/min



Changsha Zoomlion Heavy Industry Science & Technology Development Co., Ltd.

Superstructure engine



Euro II Emission

Rated power      KW/r/min


Max. output torque   N.m/r/min


New sliding design for bracing support, side hydraulic luck

Side hydraulic luck, avoiding heavy crash during the operation, ensures security.

Anti-slew steel wire

Longevity of service for the anti-slew steel wire, ensures the security of the lifting.

Moment Limiter and Display

Automatic moment limiter has the function of self testing and alarming.

Major boom head and slider

1、Hexagon major boom adopts low alloy and high strength structure steel
2、The slider with national patent, flexible operation, logical strength distribution. Strong lifting capability.

Hydraulic Motor

1、Supercharged inter-cooled engine, capable for working at place over 4500 meters altitude.
2、International dominant variable amplitude mechanism, to make the mast close or leave the machine in parallel.
3、Three section, foldable, box shape design mast, with outstanding intensity and strength.
4、The hydraulic system is efficient, energy saving, accurate on the ratio operation, load transmission, load sensitivity control.

  • Send Inquiry
  • Contact
  • Note: 1) Please write in English    2) indicates required fields
  • Inquiry List
ID Product Area Time
1976 QY50V532 Truck Crane India 2017-10-29 06:42
1975 QY50V532 Truck Crane India 2017-10-29 06:41
1974 QY50V532 Truck Crane India 2017-10-29 06:41
1973 QY50V532 Truck Crane India 2017-10-29 06:40
1972 QY50V532 Truck Crane India 2017-10-29 06:40
1971 QY50V532 Truck Crane India 2017-10-29 06:40
1970 QY50D531 Truck Crane Oman 2017-10-24 15:16
1876 QY120V633 Truck Crane India 2017-04-22 15:54
1406 QY25V432 Truck Crane Algeria 2016-07-30 04:55
1354 QAY220 Truck Crane Ethiopia 2016-06-20 16:37

Copyright Notice © 2002-2019 Construction Machinery Online. All rights reserved.

Address: Room 1903, Building 8, Tianchangyuan, Media Village, Beiyuan Road, Chaoyang District, Beijing 100107 P.R.China

E-Mail: TEL: 0086-10-52895329 FAX:0086-10-84673349 Site Map | Brand | Products